HO

These economical decoders come equipped with the JST connector as well as the standard NMRA connector for DCC. Designed for HO scale Built-in NMRA DCC plug and 9-pin plug Maximum current: 1.5 Amp Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses Programmable start voltage Programmable acceleration rate Programmable deceleration rate Programmable speed curve (factory pre-set) Programmable top voltage Programmable 14, 28, or 128 speed steps Directional lighting at 0.1 amp...

Six types of synchronized prime mover sounds 1.5 amp capacity 22 different types of horns and 8 types of bells Adjustable individual sound volumes (16 levels) Programmable either 2-digit or 4-digit addresses Programmable start voltage and top voltage Programmable acceleration and decelaration rates Programmable 14, 28, 128 speed steps Back EMF load control Supports read back address and CV value Selectable factory default speed curve Advanced speed table control CV67-CV94 Kick start voltage...

This a full featured sound decoder using MRC's 16 Bit Triple Core Stereo Sound for the most realistic sounds available. MRC's engineers have incorporated the latest advancements and technology into this 28 NMRA function, drop-in, replacement board designed decoder. Hobbyists have a multitude of onboard choices of bells, horns, lighting and more. Equipped with dual out-of-sync EMD 567B Prime Movers, choose from EMD 567B or ALCO 539T sounds recorded via live capture at trackside. Sound...

Model Rectifier Corporation's ever increasing, world beating model railroad decoder line-up now includes the only 100% drop-in, full-featured, sound decoder for the newly released Athearn RS-3 Diesel Locomotive. Designed with MRC's Brilliance live capture, full fidelity sound, this new dual-mode (DCC/DC) decoder with 28 NMRA functions, uses sounds actually recorded by MRC's Sound Engineer (railside) from a real, American Locomotive Co. (ALCO) RS-3 Turbo-charged prime mover.The installation...

A full featured, 6 function, harnessed decoder with a built in Keep-Alive??_??__. The built-in KA2 Keep-Alive??_??__ will keep your locomotive operating for 5-10 seconds without power (dirty track, bad contact, etc. etc.). Included is our auto-adjusting BEMF for outstanding slow speed performance. Also includes Quiet Drive for super quiet engine performance.Dimensions: 1.31" x 0.65" x 0.35" or 33.4mm x 16.5mm x 8.9mm

Injection-molded plastic kit. Signal heads sold separately.

Updated all-brass signal masts can be mounted on signal bridges and other structures. Assemblies include bi-polar/bi-color LEDs.

The exclusive 16-bit "Sounder" is a sound-only decoder that features six prime mover sounds MP15/SD45/ALCO539T/ALCO 244/SD70/EMD567B with a speaker that is easily added to any HO locomotive equipped with a standard, non-sound decoder or even any piece of rolling stock being pulled by the locomotive equipped with wheel pickups.The railroader simply "hooks-up" two wires to the track power pickup points in the loco and suddenly can enjoy MRC's rich, sound.Features include: Use with any HO...

The exclusive "Sounder" is a sound-only decoder and speaker that's easily added to any HO locomotive equipped with a standard, non-sound decoder or even any piece of rolling stock being pulled by the locomotive equipped with wheel pickups.The railroader simply "hooks-up" two wires to the track power pickup points in the loco and suddenly can enjoy MRC's rich, Brilliance sound and the world's most extensive feature set.The new Steam Sounder with features similar to the Diesel unit,...

This T4X decoder (see T4X for more information) comes without a harness. This can be used with any of the T-Series harnesses we offer or directly plugged into locomotives which feature an internal 9-Pin JST male connector.