Digitrax Command

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and BoostersThis item is a replacement part that can be ordered through your dealer.Digitrax does not repair this item or sell it directly to end users.Warranty coverage for this part is 90 days materials and workmanship only.

Cost effective automatic reversing for one reversing section or subdistrict User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout Auto-Reversing manages polarity mismatches on the reversing track section without manually throwing electrical toggle switches or adding another booster 8 amp peak, 6 amp continuous_Auto-reversing control for a single reversing district. Simple to wire 4 wire hookup, no locomotive wiring required No external power...

The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections.??_Lets you know when detection sections of your layout are occupied.When used in conjunction with one or two RX4 transponder detectors it operates up to 8 transponding zones and operations mode read back.??_Know what is where on your layout!BDL History:??_ BDL16 was released in 2000 and was replaced by BDL162 in 2002.??_ An update kit was available from BDL16 to BDL162.??_ BDL162 was replaced by BDL168 in...

Bxp88 8 Sect Occupancy Detecto by Digitrax Command item number: DTX11014BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring! DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout. One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock. Intelligent Automatic short-circuit and over-current...

3 Pack Edge Connector for use with PM4 Series Boards, BDL16 Series Boards and SE8 Series BoardsThis is a replacement part that can be ordered through your dealer. Digitrax does not repair this item or sell directly to end users.

Db210 Auto Reversing Booster by Digitrax Command Item Number: DTX3008Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability)Up to 8 Amps of power totalN, HO, & Large Scale Operations with Custom Voltage TrimLocoNet for easy plug ‘n play installation and system expansionEasy dip switch setupAuto resetting over temperature and short circuit protectionTrack status indicatorsStabilized track drive outputOver-voltage protectedAuto-Shutdown when command control signal is lost to...

Db220 Auto Reversing Booster by Digitrax Command item number: DTX3009Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug �n play installation and system expansion Easy dip switch setup Auto resetting over temperature and short circuit protection Track status indicators Stabilized track drive output Over-voltage protected Auto-Shutdown when command control signal is lost to prevent �runaway�...

Decoder Wire for decoder, lighting & signal installation 90ft 30AWG stranded wire-10 ft lengths in 9 colors

Dh126Mt Ho Locos w/21Mtc Inter by Digitrax Command Item Number: DTX5094Fits HO Scale Locomotives Equipped with 21MTC interface1.5 Amp/2 Amp Peak2 FX3 Functions, 0.5 AmpSeries 6 Decoder Features.Works with PX112-2 Power Xtender..805�x.64�x.17�20.45mm x 16.26mm x 4.32mm

Dh166Mt Decoder by Digitrax Command item number: DTX5093Mobile Decoder 21MTC interface with Configurable Logic Level or 12v F3-4 function outputs 1.5 Amp/2 Amps Peak 6 FX3 Functions, 0.5 Amp Series 6 Decoder Features Works with PX112-2 Power Xtender .824�x.64�x.17� 20.92mm x 16.26mm x 4.32mm

??_ Series 6 Features ??_ 2 FX3 Functions ??_ .418??_ x .621??_ x .107??_10.63mm x 15.79mm x 2.72mm ??_ Fits MicroTrains Line SW1500 units

DN136D 1 Amp N / HO Scale Wired Mobile Decoder from Digitrax Command Item Number:DTX5076 Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control. Optimized selectable LED or incandescent lamp operation Realistic...